Craft & Textile
Reading a Traditional Loom
Shafts, heddles, shuttle and reed: a short guide to the parts of a loom and what each one does.

Parts of a loom: The warp beam holds the warp under tension; heddles on shafts lift threads to open the shed; the shuttle carries the weft through; the reed beats it into cloth, which winds onto the cloth beam.
Parts of a loom at a glance
- Warp beam
- The roller at the back that holds the long warp threads and lets them out under steady tension.
- Heddles (healds)
- Wires or cords with an eye in the middle; each warp thread passes through one so it can be lifted or lowered.
- Shafts (harness)
- Frames that hold rows of heddles. Raising different shafts lifts different warp threads and decides the weave pattern.
- Treadles
- Foot pedals tied to the shafts, so the weaver can raise them while both hands stay free.
- Shuttle
- The boat-shaped carrier that takes the weft thread across, through the opening between the warp threads.
- Reed and beater (batten)
- A comb-like frame that keeps warp threads evenly spaced and is pulled forward to pack each new weft thread into place.
- Breast beam and cloth beam
- The front bar the woven cloth passes over, and the roller beneath it that winds up the finished fabric.
How weaving works, step by step
- Shedding: Press a treadle to raise one set of warp threads, opening a gap called the shed.
- Picking: Pass the shuttle through the shed, laying one weft thread (a pick) across the width.
- Beating up: Pull the reed forward to press that weft thread firmly against the cloth already woven.
- Change the shed: Switch treadles so a different set of warp threads rises, locking the weft in place, and repeat.
- Let off and take up: As cloth builds up, release more warp from the warp beam and wind the finished cloth onto the cloth beam.
A loom can look complex at first, but its parts each serve a simple purpose. The warp beam holds the long warp threads, wound under even tension. From there the threads pass through heddles — small eyes mounted on shafts — which lift or lower groups of threads to form an opening called the shed.
The shuttle carries the weft yarn through the shed. The reed, a comb-like frame, keeps warp threads evenly spaced and is used to beat each new weft row firmly into the cloth. The woven fabric is then wound onto the cloth beam at the front of the loom.
Changing which shafts are lifted, and in what order, changes the weave structure: plain weave, twill and satin all come from the same basic principle. Extra-warp and extra-weft techniques add patterns on top of that structure.
Knowing these basics makes it easier to appreciate the fabrics we wear every day — and to ask better questions about how they were made.
Craft & Textiles
View Archive